We have received a request from a university student who is involved in building a Radio-Frequency (RF) Laboratory at the University. He has received some Marconi Instruments as a donation from an old research project but did not receive the instruction manuals.
If anyone knows of manuals that might be available or has any information as to where manuals might be obtained we would be pleased to hear from you.
Marconi Instruments SANDERS DIVISION TFT Power Meter type 6460
Marconi Instruments SANDERS DIVISION Slotted waveguide section type 60148
Marconi Instruments SANDERS DIVISION Universal Probe Carriage type 6010
We regret to report the deaths of the following Veterans and extend our sympathy to the families of those mentioned.
|Alan R Alderson||1963||
|William (Bill) J Blackburn||1965||
|Billy (Bill) O Cooke||1935||
|David A French||1968||
|David A Hills||1959||
|John R Mark||1956||
|Victor (Vic) Olley||1953||
|Robert (Bob) G Prior||1968||
|Roy A Wellsteed||1952||
|Miss Joan P Wigley||1937||
This list was correct on 23 January 2017 and supersedes the list published on 01 December 2016
We have intentionally kept this page as simple as possible and provide minimal details of the deceased. However, where we have biographical details of a person and/or funeral details these will be published under the Notices tab above.
At the request of some Veterans we have included Given names where these are known to us.
We have received the following information from Seth Muir in Seattle. The pictures and drawings have been augmented by additional material from Marconi Marine
My name is Seth Muir and I’m the Executive Director of Salish Sea Expeditions, a Seattle Washington USA based non-profit charity. For 20 years we have been engaging middle and high school students, primarily from public schools, in science research and maritime skills programs on Puget Sound aboard a 61′ sailing research vessel.
I’m writing because in 2015 we purchased the M/V Elettra III (o/n 694607; BRIT304285) from a private owner here in Seattle. We have begun to retro-fit and plan to relaunch her as our region’s first science and marine technology laboratory and research vessel for kids. We have made great progress and I thought you might be interested in our exciting new plan for this historic vessel built to Lloyd’s class for the Marconi Company.
Some materials about our progress (including the Act of Congress we received) and the campaign underway to relaunch Elettra III as a student lab can be found here. I also recently won a prize pitching this idea, and a short video can be seen here which tells the story and highlights our plans.
If this is of interest at all to you, I’d love to talk more. If you ever happen to be in this area we’d love to show you around and might have some original equipment coming off the boat that could be of interest too.
My information is all below, and I thank you for your interest.
The original order and the shipyard
The launch of Elettra III
Fitting out Elettra III
Description of the vessel 1962
Plans of the vessel as built 1962
Elettra III from above 2016